Bulk Flexible Plastic Supply

Bulk PlasticFlexible plastic is used in Premier Plastic's doors (Strip doors, Swingflex doors, Rapid Auto Roll doors). Often, these doors need replacement plastic. This replacement plastic can be ordered cut to suit your exact requirement, OR full rolls of flexible plastic can be ordered, as per Size List, below.

POLYSKIN plastic is available in a variety of colours. Please see the colour chart. Please contact us for details on available thicknesses (which vary from 1mm to 1.5mm), widths and roll sizes. Polyskin is used for Rapid Auto Roll Doors and Swingflex Doors.

Some datasheets available on flexible plastic are

Back to Top

Plastic ROLL SIZES

Width(mm) x
Thickness(mm) x
Roll Length(mtrs)^
FINISH**

GRADE
NT = Normal Temp Grade
LT = Freezer Temp Grade
WG = Weld Grade

100 x 2 x 50 Clear NT, LT
150 x 3 x 75 Clear NT, LT
150 x 5 x 50 Clear NT, LT
200 x 2 x 50 Double Ribbed - Clear NT
200 x 2 x 100 Clear, Red, Yellow, Orange NT, LT (clear only)
200 x 3 x 75* Clear, Yellow NT, LT (clear only)
200 x 4 x 50* Clear NT
300 x 2 x 50 Bronze - Welding Grade WG
300 x 2 x 75 Weld Green (almost black) NT
300 x 3 x 50 Double Ribbed - Clear NT
300 x 3 x 75 Clear, Orange NT, LT (clear only)
300 x 5 x 50 Clear NT, LT
400 x 4 x 50 Clear NT
900 x 1.2 x 20* Clear NT
900 x 5 x 20 Clear NT, LT
900 x 7 x 20 Clear NT
1000 x 7 x 20 Clear NT, LT
1220 x 2 x 20 Clear NT
1200 x 3 x 20 Clear NT
1200 x 5 x 20 Clear NT, LT
1200 x 7 x 20 Clear NT, LT
1200 x 10 x 20 Clear NT
1370 x 0.3 x 50*** Clear Ultra Voilet Resistant
1370 x 0.5 x 50*** Clear Ultra Voilet Resistant
1370 x 0.75 x 30*** Clear Ultra Voilet Resistant
1370 x 1 x 25*** Clear Ultra Voilet Resistant
1500 x 2 x 20 Clear NT
1500 x 5 x 20 Clear NT, LT
1500 x 7 x 20 Clear NT, LT
1500 x 10 x 20 Clear NT
2000 x 10 x 20 Clear NT
2200 x 5 x 20 Clear NT
2200 x 7 x 20 Clear NT
Various Sizes Various Colours POLYSKIN
^ Special Sizes can be ordered, for bulk requirements;
* Only available on special orders;
** Above plastic is not anti static, however. Anti Static can be specially ordered;
*** These can only be ordered as MINIMUM OF ONE ROLL.

Back to Top

Sound Insulation Characteristics

Flexible plastic used in Swingflex and Strip Doors (of composition K 3016/35) offers good Sound Reduction Characteristics because of its special composition.

Medium Sound Transmission Characteristics Rm > 35dB (at as low as 5mm thickness).

Other properties are:

These characteristics permit use in fields that are in part not accessible to products made of other materials. The sound transmission level attainable under conditions of use is subject to, on the one hand, the type of building, for example, room size, noise absorption rate in the room, and frequency range, and on the other hand, the method by which the plastic door material has been fitted.

In doing this, the best way of working with the material is to let it hang freely and, if possible, not stretch it too tight.

Every noise reduction measure is only as good as its weakest point component, therefore the following rule-of-thumb should be noted: 10% (where non-insulated) of the opening reduces sound insulation by 50%.

Back to Top

Plastic Weight*

Plastic Thickness::
plastic Weight  
2mm::
2.5 kgs per mtr square  
3mm::
3.8 kgs per mtr square  
4mm::
5.0 kgs per mtr square  
5mm::
6.2 kgs per mtr square  
7mm::
8.7 kgs per mtr square  
10mm::
12.4 kgs per mtr square  
* Note that these are approximate weights only

Back to Top

Polyskin Colour Chart*

       
Cherry
Red
Orange
Yellow
Emerald
Green
Olive
Black
Light Blue
Royal Blue
Blue
Brown
 
White

* NOTE that these colours are only an approximate representation of the available colours and meant for the benefit of our clients. These colours may appear in different hue, saturation, tint and shade depending on the viewers' computer screen and its resolution, operating system and version used, internet browser and its settings, etc.

Back to Top